This vessels are ready for their first firing. The students and I transitioned from a 2mm nozzle to a 4mm nozzle and began printing cups with two walls. This...

I am honored to be included in CICA Press' new book, Post Human: New Media Art 2020. The Kindle version is free on Amazon until 1/7/2020. LINK #book #artbook...

The installation of Moon Creeper at the Union Gallery, University of Kansas #installation #postdisciplinary #newmedia #projection #Arduino #soloshow #KU

Another strange, digital experience! I'm using primarily light and sound for this show, not much physical material, but I have modified a slide projector to ...

#clay #clayprinting #ceramicprinting #digitalceramics #clayprinter #Arduino #digitalfabrication #cnc #diy #prototype

This red stoneware cube was the first successful test of the clay pump and auger extruder. I began designing parts about a year ago, but didn't start printin...

Students in Tech Studio, a digital fabrication course, created this collaborative installation on the campus of Hastings College. The biology department perm...

Sun Dogs 2019 Multimedia installation with single channel video on various CRT and LCD monitors. Sun Dogs 9/6/2019 - 10/26/2019 UNDRground Contemporary Arts ...

#gif #moon #apollo #digital #art #digitalart #pixel #8bit #retro

I did some testing, but the clay consistency just wasn't right. I'm not well-versed in or experienced with ceramics, but I think this clay body was too wet a...

This funnel-shaped cap is not meant to leak like that. Will have to strengthen the model and reprint with more infill and thicker walls. #3dprinting #claypri...

Sun Dogs, an exhibition of new work, will open on Friday, September 6th at UNDRground Contemporary Arts in Grand Island, Nebraska. Reception from 7 pm to 9 p...

This pump is made up of 3D printed components, an aluminum extrusion, and a very powerful stepper motor. As the motor turns, the lead screw and nut cause the...

These are various iterations of a paste extruder for printing pastes with an existing printer. Each time I print a component, I find some aspect to improve. ...

The paste extruder is working nicely with the 3D printer, but it needs to push just a little faster. After swapping the lead screw with a more aggressively-t...

John W., a current student and Fab Lab assistant, helped to wire-in and test a paste extruder with our stock Monoprice Mini V2. John soldered new connectors ...

Even before a proper test, I am finding things to improve within this clay extruder design. As I modify components, I keep the previous iterations around as ...

#3Dprinting #3Dmodeling #drawing

#3dprinting #3dmodeling #drawing #clayprinting #rapidprototyping

Tech Studio student, Jacquline C., designed and etched this dragon circuit, then programmed a fun and energetic fire-breathing animation. The laser cut castl...